BS EN 10226-1 2004
|
ID： |
B526F261FDAC44569C301EDAD414FA09 |
|
文件大小(MB)： |
0.31 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2008-2-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10226-1:2004,Pipe threads where,pressure tight joins are,made on the threads —,Part 1: Taper external threads and,parallel internal threads — dimensions,tolerances and designation,The European Standard EN 10226-1:2004 has the status of a,British Standard,ICS 21.040.30, , ,,,,, , ,BS EN 10226-1:2004,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee on,30 July 2004,. BSI 30 July 2004,ISBN 0 580 44127 X,National foreword,This British Standard is the official English language version of,EN 10226-1:2004. Together with BS EN 10226-2 and BS EN 10226-3, it,supersedes BS 21:1985.,The UK participation in its preparation was entrusted to Technical Committee,ISE/19, Ferrous pipe fittings, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 13 and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10226-1,July 2004,ICS 21.040.30,English version,Pipe threads where pressure tight joints are made on the,threads - Part 1: Taper external threads and parallel internal,threads - Dimensions, tolerances and designation,Filetage de tuyauterie pour raccordement avec étanchéité,par le filetage - Partie 1: Filetages extérieurs coniques et,filetages intérieurs cylindriques - Dimensions, tolérances et,désignation,Rohrgewinde für im Gewinde dichtende Verbindungen - Teil,1: Kegelige Au遝ngewinde und zylindrische Innengewinde -,Ma遝, Toleranzen und Bezeichnung,This European Standard was approved by CEN on 2 February 2004.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2004 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10226-1:2004: E,EN 10226-1:2004 (E),2,Contents,page,Foreword3,1 Scope .4,2 Normative references ..4,3 Terms and definitions .4,4 Symbols and explanations 6,5 Dimensions.6,6 Designation 6,7 Thread design ..8,7.1 Thread form 8,7.2 Thread lengths ..10,8 Gauging .12,9 Combination with fastening thread12,Bibliography .13,EN 10226-1:2004 (E),3,Foreword,This document (EN 10226-1:2004) has been prepared by Technical Committee ECISS/TC 29, "Steel tubes and,fittings for steel tubes", the secretariat of which is held by UNI.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsemen……
……